User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
router_wa2204b [2014/01/07 16:55]
krakonos created
router_wa2204b [2014/01/08 19:30] (current)
Line 1: Line 1:
 ====== Router WA 2204B ====== ====== Router WA 2204B ======
 +  * Serial line on J1, pin 1 is boxed, 6 GND, 5 is router's TX and 4 is RX, baud rate is 38400. 
 +  * after error "sys checksum error at 00030000!", the router won't boot. You can still use ipconfig (or similar) to setup an IP address and flash the device (if you were holding reset on startup). Remember, that the router only listens on the socket closest to the power jack.
router_wa2204b.1389113733.txt.gz · Last modified: 2014/01/07 16:55 by krakonos